3
1. IMPORTANT NOTES
•
Before connecting and using this product, please read this instruction manual carefully.
•
Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety.
•
The manual is to be considered as integral part of this product and must accompany it when it changes ownership as a reference for
correct installation and use as well as for the safety precautions.
•
Install in accordance with Studiomaster Professional's instructions and under the supervision of a licensed
Professional Engineer only.
•
Studiomaster Professional shall not assume any responsibility for the incorrect installation/or use of this product.
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result
from mishandling. Before operating your product, read this manual first and understand the safety symbols and messages so you are
thoroughly aware of the potential safety hazards.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
1.
Loudspeaker lines (amplifier outputs) can have sufficient high voltage to involve a risk of electrocution: never install or connect
speakers when the line is alive.
2. Make sure all connections have been made correctly & speaker impedances are suitable for amplifier.
3. Protect speaker lines from damage; make sure they are positioned in a such way that they can not be stepped on or crushed by any
object.
4. Make sure that no object or liquids can get in to the product as this may cause short circuit.
5. Never attempt to carry out any operations, modifications or repairs that are not expressly mentioned in this manual. Contact your
authorized dealer or qualified personnel if any of the following occur:
The system does not function or works in anomalous way.
•
The cable has been damaged.
•
Objects or liquid have got in to unit.
•
The system has been damaged due to heavy impact or fire.
•
6. Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers,
brackets and associated equipment for damage.
7. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of the installation, placement
or array. Any such condition severely reduces the safety of the installation and should be immediately corrected.
8.
Use only recommended hardware, brackets, joining plates, locking pins etc which are supplied with the unit for
the installation.
Never exceed the rating of the hardware or equipment.
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so may result in the
9.
unit falling down and causing personal injury and/or property damage.
10. Refer all installation work to the dealer from whom the speaker was purchased. Installation for flying requires extensive technical
knowledge and experience. The speaker may fall off if incorrectly installed, resulting in possible personal injury.
2. IMPORTANT SAFETY PRECAUTIONS
Indicates a potentially hazardous situation which, if mishandled,
could result in moderate or minor personal injury, and/or property damage.
Indicates a potentially hazardous situation which, if mishandled,
could result in serious personal injury.
