5
holding the Program Change button and entering the number in the second octave/numeric
entry field which corresponds to the preset sound you desire. When you release the Program
Change button, the message will be sent. Values run from 1-128. The TMK 88 will transmit the pro-
gram change when you let go of the button.
Example: If you want to play sound No. 56 on the MIDI device, hold down the Program Change
button, enter the number 56 on the numeric entry field and let go of the Program Change but-
ton. The TMK 88 will now play with sound No. 56.
CAUTION: avoid leaving in car with closed windows, near heater or in direct sunlight, otherwise
deformation or other problem may occur. Keep packaging away from small children.
APPROVAL: This device complies with part 15 of the FCC rules in accordance with the related U.S.
Directives. And also carrying the CE-mark in accordance with the related European Directives.
FATAR srl declares that the product it is conforms to the following Standard: EMC: EN 55013
RESPONSIBLE: FATAR srl, 62019 Recanati (MC), Italia is responsible for the FCC and CE marking
TRADEMARKS: All marks and trademarks used in this packaging are propertied of their respectively
registered company. Specification and features subject to change without notice.
This product has been manufactured in Italy
4
TMK 88
E
n
g
l
i
s
h
Contents:
- TMK 88
- External power supply (9VDC, 500ma, Tip Positive (+))
- Instruction manual
Technical Specifications:
-88 full size semi-weighted piano action key (7 octaves C-C)
-Velocity sensitive
-Wheel for Modulation control
-1 MIDI output
-DC input for external power supply (9VDC, 500ma, Tip Positive (+))
-Sustain Pedal Jack
-ON/OFF switch with indicator LED
-Program Change Switch
-Bank Select Switch
-Dimensions: cm 127 x 23 x 8 (in. 50 x 9 x 3.1)
-Weight: Kg 6,2 (13.6 lb)
CHANGING SETTINGS:
Bank Select Button - The bank select function allows you to change the patch bank of your MIDI
module or keyboard. Due to different manufacturer approaches to this function, the format for
entering this parameter depends on the model and manufacturer of your MIDI module or key-
board. Please refer to the MIDI Implementation Chart found in the manual of your MIDI module or
keyboard for information on the format that your unit requires.
1) If your module requires a value sent only on control channel 32, you will simply need to press
and hold the Bank Select button, and enter the bank number desired in the second octave/nume-
ric entry field. When you release the Bank Select button, the message will be sent.
2) If your module requires values to be sent on control channel 32 and control channel 0, you will
need to press and hold the Bank Select button, and first enter the value needed for cc;32 in the
second octave/numeric entry field. Then, while continuing to hold the Bank Select button, press
the key labeled “-/H” (indicates that what follows is the “higher byte”) and then enter the value
needed for cc; 0 in the second octave/numeric entry field. When you release the Bank Select but-
ton, the messages will be sent.
The TMK 88 will transmit the bank change when you let go of the button.
NOTE: Together with the Bank Select command, the TMK 88 also sends the last Program Change
number entered. This is because not all MIDI devices will switch the bank unless they subsequen-
tly receive a Program Change.
Program Change Button - The program change function is used to select which preset sound
you want from your MIDI module. You can select the program change number by pressing and
Summary of Contents for TMK-88
Page 8: ......
