Numa Compact 2/2x
by Studiologic
32
E
MIDI (Zone edit)
The NC2x has a complete MIDI Implementation, that includes 2 separate software MIDI Ports, that
you can see connecting the instrument with the USB Cable to your computer, named KEYBOARD
and CONTROLLER ports (PORT 2 and PORT 2).
The KEYBOARD port is programmed to send and receive all MIDI controls related to the internal
SOUNDS, EFFECTS and PROGRAMS, allowing to control all functions of the instrument, sending and
receiving what you physically do on it, from the notes you play on the keyboard, to the SOUNDS
you select on the 2 local sections (Upper and Lower) and for the other 2 additional sections (Part3
and Part4) that can be played via MIDI. Via MIDI you can also set the Part 3 and Part 3 SOUNDS and
Reverb levels (they cannot be sent to the internal Effects) creating a total of 4 parts MIDI Sequence.
You can play a Drums & Bass groove on MIDI CH3 and 4 and record a live part on UPPER and/or
LOWER, creating a 4 part arrangement of any kind.
The four KEYBOARD Parts (as summarized in the MIDI IMPLEMENTATION CHART at the end of this
manual) have a separate MIDI Channel each one, corresponding to the following MIDI structure:
KEYBOARD MIDI PORT
Upper= MIDI Ch1 (send and receive)
Part3: MIDI Ch3 (receive only)
Lower= MIDI Ch2 (send and receive)
Part 4: MIDI Ch4 (receive only)
MIDI
numa
compact
2x
MIDI KEYBOARD
USB
MIDI
• CONTROLLER PORT
• CONTROLLER PORT
• KEYBOARD PORT
All real time Panel controls (Organ Drawbars and Synth Sliders, SOUNDS, FX selection and related
Amounts and settings etc) are sent and received, as listed in the MIDI IMPLEMENTATION CHART.
The last four potenziometers are only for local settings (VOLUME, MASTERING, BASS & TREBLE) as
they should not be sent or received via MIDI.
In other words, anything you do and play on the NC2x can be transmitted, recorded and received
via MIDI, allowing a full control of all functions.
The second separate MIDI PORT is dedicated to the CONTROLLER section (ZONE A and ZONE B)
and thru this separate PORT you can send all MIDI controls related to the MIDI Zones and their re-
lated settings, controls, Stick functions (Pitch and Modulation, as well as the Aftertouch) etc.
Being this PORT 2 related to the MIDI function, the IMPLEMENTATION only includes the SENT MIDI
Messages, while no MIDI controls are needed and implemented as MIDI IN.
