OSCILLATION Module
Description
Tim Caswell unplugged: “Another hybrid, utilizing an exponential current source similar the the ones from ARP and
Oberheim, followed by wave shaping circuits adapted from the 2nd generation MiniMoog oscillator board, and
incorporating waveform mixing circuits pioneered by SE. This provides a large variety of tones that would otherwise
require several patch cords and an external mixer. With a two oscillator system, that's 9 or 10 patch cords and an 8
input mixer. Modest current draw, evenly from plus and minus.”
!
TC continuing: “What’s nice about our
OSCILLATION
stunner is that “the waveforms are DC-coupled [components
connected directly together without coupling capacitors], so they keep their shape even at sub-Hz speeds. The
outputs are also buffered, so the amplitude is independent of the load they are driving. The waveform levels on some
modern eurorack OSCs are often all different, and they vary depending if they go into the mixer or directly to the
filter!” Coupling the circuitry without capacitors in-line allows the full spectrum of sound frequencies to pass through.
!
Potentiometer Potential
Three attenuverter and four attenuation pots control the
FREQUENCY
,
TUNE
,
PW CV IN
,
PUSLE WIDTH
,
FM CV IN
,
and
SUB
LEVEL
for smooth, detailed, and complex expression, and sweeping expression.
!
Switch It Up
NORMAL
and
LOW RANGE
- wide sweeping audio frequencies, or clicks (respectively) for creating a rhythmic pulse or
sweep;
SINE
,
TRI
,
SAW
,
SQR
- your friendly waveform on and offs.
19
