SEM Filter Module - 2
All Controls and Patch Points
FREQUENCY
–
Adjusts the frequency, or cut-off of the filter.
RESONANCE
–
Adjusts the resonance of the filter.
*
FULL HALF TRACK
–
Switch between full and half keyboard/voltage tracking.
FREQ CV 1
–
Frequency control voltage 1 input attenuverter.
RESO CV
– Resonance control voltage input attenuverter.
FREQ CV 2
– Frequency control voltage 2 input attenuverter.
INPUT
– Adjusts the audio input.
OUTPUT
– Adjusts the audio output.
1 V/O
– One volt per octave control voltage input.
FREQ CV 1
– Frequency control voltage 1 input.
BP OUT
– Band Pass Output. No cable patched, BP passes through the mains.
RESO CV
– Resonance control voltage input—use for shimmers or howling wolf tones.
LP HP
– Low Pass / High Pass attenuverter.
INPUT
– Audio input.
OUTPUT
– Audio output.
!
*
From 7:00 (0) to 9:00 our “Negative Resonance Saturation” adds beefiness, boosting the waveform amplitude and taming
waveform transients; set to 9:00 to achieve the cleanest tone possible.
16
