Studer Innotec SA
Xcom-GSM/-LAN
User manual
31
8.3
X
COM
-LAN
8.3.1
I don't have a DHCP server in my network. What should I do?
By default, the Xcom-LAN is in DHCP/BOOTP mode. You can set a static IP address by accessing the
gateway.
1.
Open your browser
2.
Enter the default IP address in the address bar (indicated on the back of the gateway)
3.
Enter the password (default password:
xcomlan
)
4.
Click on " Network Settings " in the navigation bar
5.
Change IP configuration from “DHCP/BOOTP” to “Static”
6.
Set IP address, netmask, gateway and DNS server
7.
Click on " Submit "
8.
Click on " Save/Restart "
8.3.2
My Xcom-LAN is connected to a company network. What should I do?
The TCP port 83 may be blocked due to security settings. Please change the outbound rule for this
port.
8.3.3
My Xcom-LAN is well-configured and connects to the server, but I can’t
register it with the given GUID. What should I do?
It is possible the Moxa's TX counter is not working. If this counter is at zero, the Xcom's TX line is
damaged and must be replaced. Please contact Studer Innotec support in order to replace your
set.
