Studer Vista 5 M3 Operating Instructions Manual Download

Page: 496 / 564

6.4.7.7

Options Menu

Core Constants



For Experts Only!

You are not allowed to change anything here, even if you are an expert

user.

Directories / Files...

Allows editing the

SCoreCfgTool.ini

file, as described in the previous

chapters.

6.4.7.8

Window Menu

This menu contains standard functions for windows management. Multiple

windows and copies of existing windows are allowed.

New Channel Bus

Opens a new Channel Bus page, or, if there are already Channel Bus pages,

creates a new copy of the page.

New Interface

Opens a new Interface page, or, if there are already Interface pages, creates

a new copy of the page.

New Core

Opens a new Core page, or, if there are already Core pages, creates a new

copy of the page.

New Tree

Opens a new VMC Tree dialog.

Cascade

Arranges the Workspace as cascaded windows.

Tile

Arranges the Workspace as tiled windows.

1, 2, 3, ...

Brings the selected page to the top of the workspace

Vista 5 M3 Digital Mixing System

6-38 Session Configuration

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands