- 9 -
The pump should not be screwed down, ensure anti-vibration feet and flex hoses
are used.
Never operate pump with inlet and/or outlet isolating valves in the closed
position. Damage will occur!
Pump Connections (General)
Pump body.
Flow switch.
Anti-vibration foot.
Fig. 9
Vent plug.
Isolating valve.
Delivery supply to shower/bathroom
fitted with G¾ male threaded pump
connection.
G¾ running nut with captive sealing
washer.
Flexible hose.
22 mm copper outlet
pipework.
22 mm flexible pipes
with push-in
connections, ensure
that connection is fully
pushed home into hose
end fitting and that hoses are kept as
straight as possible.
In the case of horizontal feeds use a
22 mm compatible stem elbow (not
supplied). Do not bend the hose
more than 30° as they may become
damaged, transmit noise or leak.
22 mm copper inlet
pipework
Suction supply
from tank with
push-in plumbing
connection.
Integral pump isolating
valve shown in ‘OFF’
position.
Integral pump isolating valve
shown in ‘ON’ position.
Flexible hose.
Inlet strainer housed
in this location (see
maintenance section).
Suction supply from tank
with G¾ male threaded
pump connection.
G¾ running nut with captive
sealing washer.
30°
Max.
permitted
flexible
hose
bend.
Pressure switch.
Do not kink or twist
the hose.
