- 19 -
ENVIRONMENT PROTECTION
Your applicance contains valuable materials which can be recovered or recycled.
At the end of the products’ useful life, please leave it at an appropriate local civic waste
collection point.
GOOD PRACTICE
Always flush system prior to starting a new or serviced pump.
Always ensure the pump is primed (filled with water) before starting.
DO NOT RUN
PUMP DRY.
Always ensure the pump has a minimum flooded suction head of 1 metre at all times.
Always ensure anti-vibration feet are used.
Ensure pump is sited in dry ventilated position.
Abide by the Water Supply (Water Fittings) Regulations 1999.
Always install isolating valves to both suction and delivery pipe work.
Ensure earth continuity between suction and delivery pipes.
Always ensure pump wiring conforms with the current national electrical regulations and is
installed by a competent person.
Do not install a non-return valve, or devices which contain
non-return valves, in the suction (inlet) pipework to the
pump. The pump must be free to vent to the supply tanks
at all times.
Disconnect electrical supply before working on pump.
Carefully check pump and pipework for leaks before leaving the installation unattended.
Please record here for your records.
TYPE NO.
SERIAL NO.
DATE PURCHASED
Body
Reed Clamp
Magnet
Groove
Fig. 18
