Stuart Turner CH4-30 Installation, Operation & Maintenance Installation, Operation & Maintenance Instructions Download Page 2

- 2 -

Cont ...

PRODUCT DESCRIPTION

Electric motor driven centrifugal pump.

APPLICATION

These self priming centrifugal pumps are designed to pump clean fresh water and can be 
used for pressure boosting, fluid transfer and distribution.

Inlet pressures to the pump and ambient temperatures must not exceed the 
values given in the technical specifications.

 

z

This pump set must not be used for any other  

 

  application without the written consent of Stuart    
  Turner Limited.

 

z

Do not connect this pump to the mains water  

 

 supply.

 

z

The use of this product requires experience with    

  and knowledge of the product. 
  Persons with reduced physical, sensory or mental  
  capabilities must not use this product, unless they  
  are under supervision or have been instructed in    
  the use of the product by a person responsible for  
  their safety.

 

z

Children must not use or play with this product.

Please read installation details carefully as they are intended to ensure this 
product provides long, trouble free service.  Failure to install the unit in 
accordance with the installation instructions will lead to invalidation of the 
warranty.

STORAGE

If this product is not to be installed immediately on receipt, ensure that it is stored in a dry, 
frost and vibration free location in its original packaging.

CONTENTS 

Page

Checklist  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Facts - read before commencing installation    . . . . . . . . . . . . . . . . . . . 4
Location   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Plumbing    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Technical Specification 

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Trouble Shooting    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Guarantee  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Summary of Contents for CH4-30













Reviews: