- 23 -
Cont...
6.22
Handing over:
a) Complete the logbook supplied
b) The installer should re-check the system and ensure it is completely satisfactory
before demonstrating to the end user.
c) The end user should be aware of the following –
1. The most cost effective use of the Electrastream system using economy and
standard
tariffs.
2. How to set the temperature of the tap hot water (mixing valve).
3. How to set all Electrastream Controller functions.
4. How to set room thermostat.
5. The function of the Pressure Relief Valves and Combination valve and that over
pressure will cause steam and scalding water to be emitted from the discharge
pipes.
6. That the tundish is supplied as a visual identification for over pressure.
7. The procedure to follow in the event of over pressure. See Section 9.
d) This manual and supplements must be left with the end user together with a copy of
the completed guarantee form.
6.23
For further technical support:
Phone the Stuart Turner TechAssist team on +44 (0) 800
31 696 80. Our staff are trained to help and advise you over the phone.
