REAR PANEL SWITCHES AND CONNECTIONS
>>
Download the complete manual at
<<
INPUT
MONO
IN
OUT L
OUT R
STEREO
USB
USB
Use for connecting to a computer
for controlling via MIDI and
updating firmware.
9VDC
Use the included power supply or
an adapter with the following rating:
9VDC center negative. 300mA
minimum.
AUDIO INPUT SELECTOR
MONO
: Use with a mono input signal.
Output is stereo.
STEREO
: Use with a stereo input signal.
Output is stereo.
IN
High impedance ultra low-noise discrete
Class A JFET preamp input. TRS adapter
cable required for stereo input signal.
OUTPUTS
Low impedance stereo audio signal outputs.
Use
OUT L
for mono output.
EXP / MIDI
Multifunction communication jack for external control of Zelzah’s features and
functions. Use a standard TRS expression pedal for continuous control over the
knobs of the pedal (default setting). Connect Strymon MiniSwitch for remote
selection of a favorite setting or connect a Strymon MultiSwitch Plus for access to
3 presets. To use MIDI with Zelzah, connect a MIDI controller to either a Strymon
Conduit or a Strymon MIDI EXP cable to send MIDI to Zelzah via 1/4” TRS MIDI.
See full manual for configuration details.
