manualshive.com logo in svg

Strymon DIG, User Manual, Page: 32 / 47

Share
Download
Strymon DIG User Manual Download Page 32

pg 32

DIG

 

- dual digital delay

Configuring DIG to Use MIDI

 (cont�)

STEP 3 – SET MIDI OUT MODE

1 

Press and hold the 

TAP 

footswitch while connecting power to the 

pedal� Once both LEDs flash, release the footswitch�

2 

Turn the 

TONE

 knob to select what kind of MIDI data is sent from DIG 

to other MIDI devices� Both LEDs will flash momentarily to indicate 
status�
• 

OFF:

 

RED

 (default) - No MIDI messages are sent out of DIG� 

• 

THRU:

 

BLUE

 - Incoming MIDI messages are sent to the MIDI Out 

without any additional MIDI messages generated by DIG� 

• 

SEND CC, PC, OTHER: WHITE

 - MIDI CC, PC, and SysEx mes-

sages generated by DIG are all sent to the MIDI Out�

• 

SEND CC, OTHER:

 

GREEN

 - MIDI CC and SysEx messages gener-

ated by DIG are sent to the MIDI Out�

• 

SEND PC, OTHER:

 

PURPLE

 - MIDI PC and SysEx messages gen-

erated by DIG are sent to the MIDI Out�

• 

SEND OTHER:

 

AMBER

 - SysEx messages generated by DIG are 

sent to the MIDI Out�

3 

Press either footswitch to store the MIDI OUT mode and exit�

Summary of Contents for DIG
















































Reviews:

No comments