pg 22
DIG
- dual digital delay
External Control
Expression Pedal Setup
Use a TRS expression pedal to control the knobs of DIG �
1
Configure the
EXP/MIDI
jack for Expression mode� (See
for
configuration instructions�)
2
Connect an expression pedal to the
EXP/MIDI
jack of DIG using a TRS
cable�
RIGHT IN
LEFT OUT
RIGHT OUT
EXP
MIDI IN
USB
MIDI OUT
3
Press and hold both footswitches until both LEDs blink
GREEN
�
4
Rock the expression pedal to the HEEL position� Only the
TAP
LED will
blink
GREEN
�
5
Set the knob(s) you would like to control to the desired settings for
the HEEL position of the expression pedal� Only the
TAP
LED will turn
RED
�
6
Rock the expression pedal to the TOE position� Only the
ON
LED will
blink
GREEN
�
7
Set the knob(s) you would like to control to the desired settings for the
TOE position of the expression pedal� Only the
ON
LED will turn
RED
�
8
Press either footswitch to exit and store your expression pedal setup�
NOTE: Your expression pedal assignment is saved per Favorite setting or
MIDI preset�
NOTE: If DIG is set to respond to
MIDI EXPRESSION
and the
EXP/MIDI
jack is
set to MIDI mode, you can send MIDI CC# 100 with values 0 (heel) to 127 (toe)
to perform the expression pedal setup�