Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 38 / 82

36
The “Call Status” bubble will indicate “In Call With [Room Name].”
Please see the “Active Call” section for more in-depth information on “Active Call”
interface controls.
Note
If the SwitchPoint Infinity® 2 Control Interface is unable to connect to the remote room, an error
message will appear in the “Call Status” bubble indicating if the location is busy, in private, or
offline.
12.2.3 Active Call
The “Active Call” page is displayed automatically after a call is connected. The “Call Status” bubble will indicate
“In Call With [Room Name].” If there is no call connected, the “Active Call” tab is grayed out.
The
Near
and
Far
buttons on the “Active Call” screen are used to select which camera to control during a call. The
camera controls work in the same manner as the “Room Camera” controls on the “Room Camera” interface.
The “What you send” and “Where you see it” drop down menus are convenient ways to route video to and from
the remote connection. The “What you send” option on the “Active Call” screen displays a preview of the remote
room's video image to a local display. When the far video is selected, the video preview pane will display the
remote image.
The “What you send” drop down menu contains a list of all configured sources and devices compatible for
routing to the remote connection.
When the “What you see” drop down menu is selected, the menu lists all compatible video sources from the
remote room.
The “Where you see it” drop down menu contains a list of all devices and displays on which incoming video can
be displayed.
StockCheck.com