Stryker SwitchPoint Infinity 2, Operation And Maintenance Manual, Page: 26 / 82

24
8.1.3 Using Sidne along with Viewing and Recording a Source on a Display
To route a source through a device to a display and use Sidne, perform the following steps:
1. Select a source, such as the Endo Cam, from the Video Sources area located on the left side of the screen.
2. Select a device through which to route the source, such as the SDC, from the Devices area at the top of the
screen. The icon for the video source being routed through the device will be displayed on the device
button.
3. Select the Sidne destination from the Devices area. The icon for the video source being routed through
Sidne will be displayed on the device button.
4. Select a display, such as Monitor 2, from the Displays area located on the right side of the screen. The icon
for the video source being routed through the display will appear on the display button, and the route has
been completed.
Note
In the case of the SDC HD
only
the video that appears in the Preview area of the touch panel and
that on the display monitor are not the same. The video that appears in the Preview area of the
touch panel is passed directly from the input source. The input video is then passed through the
SDC HD, which is then displayed on the monitor. This means that for SDC HD
only
the “Record”
and other textual overlays will not be displayed on the SPI 2 preview, but they will be displayed on
the monitors.
Note
When a source video is being recorded on SDC HD and Sidne, the chain route will always place
the Sidne ahead of the SDC HD. In the previous example, the Endo Cam video will always be
routed through the Sidne (which adds the Sidne icon overlay on the video), then through SDC
HD to be recorded, and then it will be displayed on Monitor 2.
Note
The order in which the SDC HD/Ultra or Monitor 2 are selected does not affect the order in
which the video route or chain is created. In the previous example, if Monitor 2 is selected before
selecting the SDC HD/Ultra, the video from the Endo Cam will still be passed through the SDC
HD/Ultra before being routed to Monitor 2.
StockCheck.com