Stryker Secure II 3002 Maintenance Manual Download Page 274 | Manualshive

Page: 274 / 276

background image

Warranty

269

Limited Warranty:

Stryker Medical Division, a division of Stryker Corporation, warrants to the original purchaser that its products

should be free from defects in material and workmanship for a period of one (1) year after date of delivery.

Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or

replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. Stryker

warrants to the original purchaser that the frame and welds on its beds will be free from structural defects

for as long as the original purchaser owns the bed. If requested by Stryker, products or parts for which a

warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or

repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall

void this warranty. Any repair of Stryker products using parts not provided or authorized by Stryker shall void

this warranty. No employee or representative of Stryker is authorized to change this warranty in any way.
Stryker Medical beds are designed for a 15 year expected life under normal use conditions and appropriate

periodic maintenance as described in the maintenance manual for each device.
This statement constitutes Stryker’s entire warranty with respect to the aforesaid equipment. STRYKER

MAKES NO OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, EXCEPT

AS SET FORTH HEREIN. THERE IS NO WARRANTY OF MERCHANTABILITY AND THERE ARE NO

WARRANTIES OF FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL STRYKER BE

LIABLE HEREUNDER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR IN ANY

MANNER RELATED TO SALES OR USE OF ANY SUCH EQUIPMENT.

To Obtain Parts and Service:

Stryker products are supported by a nationwide network of dedicated Stryker Field Service Representatives.

These representatives are factory trained, available locally, and carry a substantial spare parts inventory to

minimize repair time. Simply call your local representative, or call Stryker Customer Service at (800)

327

−

0770.

Service Contract Coverage:

Stryker has developed a comprehensive program of service contract options designed to keep your equip-

ment operating at peak performance at the same time it eliminates unexpected costs. We recommend that

these programs be activated

before

the expiration of the new product warranty to eliminate the potential of

additional equipment upgrade charges.

A SERVICE CONTRACT HELPS TO:

Ensure equipment reliability

Stabilize maintenance budgets

Diminish downtime

Establish documentation for JCAHO

Increase product life

Enhance trade

−

in value

Address risk management and safety

«
...
272
273
274
275
276
»

Summary of Contents for Secure II 3002





















































































































































































































































































Reviews:

No comments

Related manuals for Secure II 3002

Brand: zipwake Pages: 2

Brand: zipwake Pages: 2

Brand: Panasonic Pages: 9

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

BODY ARMOR PRO TERM

Brand: Darco Pages: 6

Brand: EAW Pages: 2

Brand: abc Pages: 28

Brand: Gatekeeper Pages: 8

Bure Rise & Go DB 56-309

Brand: Gate Pages: 8

Brand: HABYS Pages: 16

Brand: Nederman Pages: 255

Brand: olympia electronics Pages: 4

Brand: quadient Pages: 14

Brand: Qu-Bit Electronix Pages: 31

Brand: TEC Pages: 6

Brand: U Technology Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands