Stryker Prime 1105 Operation Manual Download Page 12

Page: 12 / 74

Exxp

ecctte

d sse

errvviicce

e lliiffe

The P

Prriim

e S

erriie

ess stretcher and the P

Prriim

e S

erriie

ess stretcher with P

Prriim

e X

X option have a 10 year expected service life

under normal use conditions and with appropriate periodic maintenance.

Diissp

ossa

all//rre

eccyycclle

Always follow the current local recommendations and/or regulations governing environmental protection and the risks
associated with recycling or disposing of the equipment at the end of its useful life.

nttrra

aiin

diicca

attiio

nss

The P

Prriim

e X

X option is not recommended for use with a mattress with a thickness greater than four inches.

The P

Prriim

e X

X option is not compatible for use with a C-Arm.

The P

Prriim

e X

X option is intended for use in all establishments other than home healthcare, domestic, and those directly

connected to the public low voltage power supply network that supplies buildings used for domestic purposes.

ecciiffiicca

attiio

nss

Prriim

e S

erriie

ess 2

6 iin

n.. w

wiid

dtth

Prriim

e S

erriie

ess 3

0 iin

n.. w

wiid

dtth

Prriim

e S

erriie

ess H

T P

acckkss

Prriim

e X

X o

pttiio

n 3

0 iin

n..

wiid

dtth

otte

e -- Safe working load

indicates the sum of the patient,
mattress, and accessory weight.

700 lb

318 kg

700 lb

318 kg

700 lb

318 kg

Maximum patient weight

675 lb

306 kg

675 lb

306 kg

675 lb

306 kg

Overall length

85 in. (± 0.5
in.)

215.9 cm

85 in. (± 0.5
in.)

215.9 cm

85 in. (± 0.5
in.)

215.9 cm

Overall length (litter extension
option)

89.9 in. (±
.75 in.)

228.3 cm

89.9 in. (±
.75 in.)

228.3 cm

Overall width (siderails up)

34 in. (± 1
in.)

86.4 cm

38 in. (± 1
in.)

96.5 cm

38 in. (± 1
in.)

96.5 cm

Overall width (siderails down)

30.25 in. (±
0.5 in.)

76.8 cm

30.5 in (±
0.5 in.)

77.5 cm

30.5 in. (±
0.5 in.)

77.5 cm

Minimum height

20.75 in.

52.7 cm

20.75 in.

52.7 cm

23.25 in.

59.1 cm

Maximum height

34 in. (± 1
in.)

86.4 cm

34 in. (± 1
in.)

86.4 cm

36.5 in. (± 1
in.)

92.7 cm

Fowler backrest angle

0° to 90° (± 5°)

Gatch height

5.5 in. (14 cm) minimum

Not applicable

1115-309-001 Rev C.2

Summary of Contents for Prime 1105











































































Search results

Summary of Contents for Prime 1105

Reviews:

Related manuals for Prime 1105

Brands by name

Popular brands

Stryker Prime 1105, Operation Manual

Search results

Summary of Contents for Prime 1105

Reviews:

Related manuals for Prime 1105

Brands by name

Popular brands