Stryker Prime 1105, Operation Manual

Page: 24 / 74

3. For Model 1125 only, make sure that the On/Drive-Off/Manual switch is in the Off position.
4. Unplug the power cord from the hospital grade wall outlet if your product is equipped with the electric lift option or
electric litter option.
5. Put the brake/steer pedal (A) in the steer position (Figure 9).
A
B C
F Fiig gu urre e 9 9 –– T Trra an nssp po orrttiin ng g w wiitth h B Biig g W Wh he ee ell
6. Use the push handles to push the product.
7. Apply the brakes to lock the product in place.
N No otte e
• Always make sure that the brake is released before you attempt to move the product. Attempting to move the product
with the brakes applied may result in operator or patient injury.
• The B Biig g W Wh he ee ell (B) does not pivot. You cannot move the product sideways when you apply B Biig g W Wh he ee ell.
• When you apply B Biig g W Wh he ee ell (B), the product is raised and the foot end casters (C) are elevated. The product rests on the
head end casters and B Biig g W Wh he ee ell makes the product easier to steer (Figure 9).
P Po ossiittiio on niin ng g o orr sstto ow wiin ng g tth he e h he ea ad d e en nd d p pu ussh h h ha an nd dlle ess o op pttiio on n
To position or stow the head end push handles:
1. Pivot the handles (A) up from the head end of the product (Figure 10).
2. Push down on the handles to lock them into position.
EN 20 1115-309-001 Rev C.2