Stryker Power-PRO TL Operation And Maintenance Manual Download Page 16 | Manualshive

Page: 16 / 151

Stryker Power-PRO TL Operation And Maintenance Manual Download Page 16

16

6550-309-001 REV A

www.stryker.com

Return To Table of Contents

Summary of Safety Precautions

NOTE

• Loose items or debris on the patient compartment floor can interfere with the operation of the cot fastener. Keep

the patient compartment floor clear.

• This manual should be considered a permanent part of the cot and should remain with the product even if the cot

is subsequently sold.

• Stryker continually seeks advancements in product design and quality. Therefore, while this manual contains the

most current product information available at the time of printing, there may be minor discrepancies between your
cot and this manual. If you have any questions, please contact Stryker Customer Service or Technical Support
at +44 (0) 1635 262431.

• The operators must lift the cot weight slightly off of the wheels to use the manual extend or retract while a patient

is on the cot.

• Activation of the manual back-up release handle may cause the cot to drop slowly if less than 7 stones (45 kg)

(100 lb) are on the cot.

•  Batteries slowly lose charge when not on the charger.
•  Lowering the backrest without a patient may require slightly more pressure.
•  When engaging the cot into the fastener, it is advised to disengage the caster steer lock feature to allow the head

end casters to swivel freely and allow the head end of the cot to more easily align with the fastener.

• These are general instructions for installation of the Pedi-Mate®. Safe and proper use of the Pedi-Mate® is solely

at the discretion of the user. Stryker recommends that all users be trained on the proper use of the Pedi-Mate®
before using it in an actual situation. Retain these instructions for future reference. Include them with the product
in the event of transfer to new users.

• Failure to follow the cleaning directions when using the specified types of cleaners may void this product’s

warranty (see

).

«
...
14
15
16
17
18
...
»

Summary of Contents for Power-PRO TL
























































































































































Reviews:

No comments