manualshive.com logo in svg

Stryker Power-PRO TL, Operation And Maintenance Manual, Page: 147 / 151

Share
Download
Stryker Power-PRO TL Operation And Maintenance Manual Download Page 147

www.stryker.com

6550-309-001 REV A

147

Return To Table of Contents

EMC Information

Guidance and Manufacturer’s declaration - Electromagnetic Emissions

The model 6550 

P

ower-PRO™ TL cot is intended for use in an electromagnetic environment specified below. The 

customer or the user of the model 6550 

P

ower-PRO™ TL cot should ensure that it is used in such an environment.

Emissions Test

Compliance

Electromagnetic Environment

RF Emissions

CISPR 11

Group 1

The model 6550 

P

ower-PRO™ TL cot uses RF energy 

only for its internal function.  Therefore, its RF emissions 
are very low and are not likely to cause any interference 
in nearby electronic equipment.

RF Emissions

CISPR 11

Cot:  Class A

The model 6550 

P

ower-PRO™ TL cot

 

is suitable for use in 

all establishments other than domestic and those directly 
connected to the public low-voltage power supply network 
that supplies buildings used for domestic purposes.

SMRT Charger 

(6500-201-010):  Class A

The SMRT Charger is suitable for use in all establishments 
other than domestic establishments other than domestic 
and those directly connected to the public low-voltage 
power supply network that supplies buildings used for 
domestic purposes.

DeWALT

®

 AC/DC Charger

(6500-070-000):  Class B

The 

DeWALT

®

 AC/DC Charger and  

DeWALT

®

 DC/DC 

Charger are suitable for use in all establishments including 
domestic establishments and those directly connected to 
the public low-voltage power supply network that supplies 
buildings used for domestic purposes.

DeWALT

®

 DC/DC Charger

(6500-072-000):  Class B

Harmonic Emissions

IEC 61000-3-2

Cot: N/A

SMRT Charger 

(6500-201-010):  Class A

DeWALT

®

 AC/DC Charger

(6500-070-000):  Class A

DeWALT

®

 DC/DC Charger

(6500-072-000):  N/A

Voltage Fluctuations

Flicker Emissions

IEC 61000-3-3

Cot: N/A

SMRT Charger 

(6500-201-010):  Complies

DeWALT

®

 AC/DC Charger

(6500-070-000):  Complies

DeWALT

®

 DC/DC Charger

(6500-072-000):  N/A

POWER-PRO™ TL (CONTINUED)

Summary of Contents for Power-PRO TL
























































































































































Reviews:

No comments