
H
K
J
H
H
H
J
J
J
J
H
H
H
H
FFiigguurree 1122 –– SSoolleennooiidd vvaallvvee
4. Remove the solenoid valve.
5. Disconnect the connector for the solenoid valve.
NNoottee -- Inspect the replacement solenoid valve to make sure that the O-ring is in place. If the O-ring is not in place,
transfer the O-ring from the removed solenoid valve to the supplied solenoid valve.
6. Discard the solenoid valve.
7. Reverse steps to reinstall.
NNoottee
• During reinstall, align the VVeellccrroo® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
8. Verify proper operation before you return the product to service.
PPoowweerr ssuuppppllyy rreeppllaacceem
meenntt
TToooollss rreeqquuiirreedd::
• Zipper pull tool or equivalent
• T10 Torx driver
• ESD system
PPrroocceedduurree::
1. See
2. See
Protecting against electrostatic discharge (ESD)
3. Remove the wires for the fans and DC power from the wire clip (A).
4. Disconnect the DC power connector from the main board (AR) (connector R) (Figure 13).
EN
34
2972-009-002 Rev AA.0
Summary of Contents for Isolibrium 2972
