R
A
B
D
FFiigguurree 1133 –– PPoowweerr ssuuppppllyy
5. Disconnect the AC power connector (B) from the power supply (Figure 13).
6. Disconnect the two foot box fans (D).
7. Disconnect the ground wire connector from the power supply.
8. Using a T10 Torx driver, remove the four screws (C) that secure the power supply (AY) to the foot box (Figure 13). Save
the screws.
NNoottee -- During reinstall, torque (C) to 8 ± 2 in-lb.
9. Remove and discard the power supply (AY) (Figure 13).
10.Reverse steps to reinstall.
NNoottee
• During reinstall, align the VVeellccrroo® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Cover the zipper with the support surface cover watershed.
• Do not dispose of as unsorted municipal waste. See your local distributor for return or collection systems available in
your country.
11.Verify proper operation before you return the product to service.
2972-009-002 Rev AA.0
35
EN
Summary of Contents for Isolibrium 2972
