Return To Table of Contents
www.stryker.com
2031-009-005 REV A
11
Intended Use
This manual is designed to assist you with the operation of the Model 2031 Epic II
®
Critical Care Bed. Read it thoroughly
before using the equipment.
Specifications
Safe Working Load
Note:
Safe Working Load indicates the sum of the
patient, mattress, and accessory weight.
500 lbs
227 kg
Bed Weight
594 lbs
269 kg
Overall Length/Width
Length
91”
231 cm
Width
42.5”
108 cm
Minimum Bed Height
18”
46 cm
Maximum Bed Height (Standard)
Maximum Bed Height (Enhanced)
30” to 31”
32” to 33”
76.2 cm to 78.7 cm.
81.2 cm to 83.8 cm.
Fluoroscopy Access
Epic II®
17”
43.1 cm
Knee Gatch Angle
0° to 30°
Back Angle
0° to 90°
Trendelenburg/Reverse Trendelenburg
-12° to +12° ±2°
Electrical Requirements
230 VAC, 50/60 Hz, 7.0 A
Battery Voltage
(1) 9V (Alkaline Battery) - Nurse Call Option
Noise Level
< 65 dB
Duty Cycle
3 minutes ON / 30 minutes OFF
(Continuous with Intermittent Loading)
Mattress Specifications
Thickness
6”
15.2 cm
Width
>= 35”
>= 88.9 cm
Length
>= 84”
>= 213.4
ILD
80 lbs
36.3 kg
The above stated mattress specifications assist in ensuring the product conforms to HBSW and IEC
specifications.
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations.
Introduction
Summary of Contents for EPIC II 2031
Page 2: ......
Page 26: ...Return To Table of Contents 26 2031 009 005 REV A www stryker com Notes ...
Page 40: ......
