20
III
To Program Footswitch Options:
From the Adjust Options screen, touch the Program Footswitch button to program the footswitch pedals and pads based
on the capabilities of the connected handpiece. Two footswitches may be connected to and simultaneously operated
from the same console. However, two footswitches cannot be used to control the same handpiece at the same time.
Figure 11. Footswitch Options Screen
OSC <> High/low
Change Port
High <> Low
Handpiece port
Direction: REV
Op Mode: Default
Run Mode: Var
Direction: FWD
Op Mode: Default
Run Mode: Var
Foot-Switch Options - FORMULA HANDPIECE - 3rd Port
Pedal A Options - FORMULA HANDPIECE - 3rd Port
Op Mode
Op Mode
Default
Run Mode
Var
Direction
REV
Default
High
Low
OSC
Assign Specific Option
Select a footswitch pad [I, II or III] or pedal
[A or B] and assign a specific option.
View Handpiece Port
Indicates the assigned handpiece port for which the footswitch is programmed.
Touch the arrow buttons to scroll
through the footswitch options.
The available options are
handpiece specific. Touch the OK
button to select the option.
