3
Read and understand these instructions before use. Familiarization with the Stryker CastVac prior to use is important. For further
information contact your Stryker Instruments Representative or call Stryker Customer Service at (800) 253-3210. (Outside the USA,
contact your nearest Stryker Subsidiary.)
The Stryker CastVac simultaneously suctions dust and chips as you cut casting material. The CastVac is designed to be used in
combination with the Stryker Cast Cutter.
Models:
REF 986 CastVac with 8 foot hose and Mobile Stand, (100-120V unit)
REF 987 CastVac with 8 foot hose and Wall Mount, (100-120V unit)
REF 996 CastVac with 8 foot hose and Mobile Stand, (220-240V unit)
A lightening bolt within a triangle is intended to alert service personnel of the presence of dangerous voltage that
may cause injury or fatal electrical shock. Disconnect unit from electrical supply before servicing.
An exclamation point within a triangle is intended to alert the user to the presence of important operating and
maintenance (service instructions) in the literature accompanying the products.
PROTECTIVE EARTH GROUND
STANDBY -
In this mode, the CastVac will run when
the Cast Cutter power switch is turned on.
OFF
(only for part of equipment)
CAST CUTTER
ON
(only for part of equipment)
CASTVAC™
Introduction
Symbol Definition
