Stryker Medical 1050 Maintenance Manual Download Page 16

Page: 16 / 108

Service Information

JACK DESCENT RATE ADJUSTMENT

Required Tools:

Screwdriver

Bungee Cords

Adjustment Procedure:

1. Pump the litter up to full height.

2. Lift the base hood, separating the hood from the base frame. Using the bungee cords, support the base

hood.

3. The descent rate needle valve is located on the base of the jack. Turn the needle valve clockwise, with

a screwdriver, to decrease the rate of descent. Turn it counterclockwise to increase the rate of descent.

4. Adjust the needle valve so that the foot end of the stretcher descends slightly faster than the head end.

(The factory settings are 3/4 turn from closed for the head end and 1 1/2 turn from closed for the foot end.)

NOTE
The larger percentage of a patient’s weight is located in the torso area. Adjust descent rate accordingly.

5. Remove the bungee cords supporting the base hood and secure the hood to the base frame.

NOTE
The jack descent rate was preset at the factory to drop the foot end faster than the head. It is recommended
that the foot drop faster to avoid patient disorientation.

Summary of Contents for 1050













































































































Search results

Summary of Contents for 1050

Reviews:

Related manuals for 1050

Brands by name

Popular brands

Stryker Medical 1050, Maintenance Manual

Search results

Summary of Contents for 1050

Reviews:

Related manuals for 1050

Brands by name

Popular brands