Struers Secotom-10, Instruction Manual

Page: 32 / 193

Secotom-10
Instruction Manual
28
This parameter is only displayed when a clamping tool with rotation
is fitted on the cutting table.

Mount the clamping tool on the cutting table.

Place the plug in the socket at the rear wall inside the cutting
chamber and secure it by turning the ring.

Insert the workpiece into a specimen holder with dovetail and
mount onto the clamping tool.


Use the Arrow buttons

to select “Chuck mode”.


Press ENTER

to display the popup box and use the
Arrow buttons

to change the setting:


Press ENTER

to select the setting

The software set up is now complete and the cutting
process can be started.
Chuck Mode
(accessory)
Note
For clamping tools with Rotation; when chuck mode is set to Off, the work
piece is prevented from rotating during the cutting process.
Note
All the value and function settings defined in the CUTTING SETUP menu
are saved in the Secotom-10’s memory. Therefore, if the power to the
machine is interrupted, these values are remembered.