Struers Secotom-10, Instruction Manual, Page: 22 / 193

Secotom-10
Instruction Manual
18
A
B

The CONFIGURATION Menu now appears in the
language you have chosen.
Esc

Press Esc to return to the MAIN MENU.
The display is primarily divided into 2 areas. The position of these
areas and the information they contain are explained in the
illustration below, which uses the CONFIGURATION Menu as an
example:
A Heading: this is a navigational aid, telling you where you are in
the software.
B Information fields: these will either be numerical values or
alphanumerical fields providing information associated with the
process shown in the heading. The inverted text shows the
cursor position.
During the cutting process the screen could look as follows:
A Current cut-off wheel speed.
B Feed speed of specimen on cutting table (specified unit/sec,
mm/s or inch/s).
C Specified travel of cutting table (Fixed distance or Auto setting).
(Counting down when length is specified).
D Loading bar indicating force applied on cut-off wheel motor.
Reading the Display
Please Note
The sample screens in this Instruction Manual show a number of
possible texts. The actual screen displayed may differ from the
samples in this manual.
A
B
C
D