Struers RotoForce-4, Instruction Manual

Page: 24 / 127

RotoForce-4
Instruction Manual
18
1. Force Reduction
RotoForce-4 is equipped with the possibility of automatic
reduction of the force towards the end of the preparation.
If FORCE REDUCTION is enabled, the force will automatically
be reduced from the actual value down to 5 N during the last 30
seconds of the preparation step. This will result in lower material
removal and smaller scratches than usual. The time for the
subsequent preparation steps can be reduced as the amount of
damaged material to be removed will be reduced.
>> 30N 04:00
SINGLE SAMPLES
m
Press MENU
m
until you reach the
FORCE REDUCTION screen.
FORCE REDUCTION
NO
L L
Press SELECT
L
to toggle between
NO and YES.
FORCE REDUCTION
YES
o
Press STOP
o
to accept the choice.
Operation Menu will appear again.
>> 30N 04:00
SINGLE SAMPLES