4.
Clean the polished spot with water/alcohol and dry it carefully.
Note
If you are working in a field location, it may be necessary to bring additional
lighting to ensure safe handling of any electrolyte drips or spills.
5.
Wipe up any drips of electrolyte from the polishing pistol and the holder.
6.9
Emptying electrolyte from the holder
Before you carry or transport the machine to another location, you must empty any remaining
electrolyte from the holder.
CAUTION
Always request and read the Safety Data Sheet for each electrolyte before you
start working with it.
CAUTION
The operator must be fully instructed in how to handle and use electrolytes with
this machine.
CAUTION
The machine is designed to be used with electrolytes recommended by
Struers.Electrolytes that are not recommended by Struers can be dangerous to
the operator or harm the machine.
CAUTION
Before you carry or transport the machine to another location, make sure that you
empty the holder of any remaining electrolyte.
1.
Make sure the pistol is placed in the holder.
2.
Press
Start
, and then press
Stop
.
The pump runs for the preset post-process clean-up time to
empty electrolyte from the holder. For a description of
Post-
process clean-up time
, see
3.
Use a soft, slightly damp cloth to wipe up any drops of electrolyte
from the pistol and the holder.
4.
After use, clean the machine and any used electrolyte container
system with water. See
6.10
External etching (option)
After polishing with one electrolyte or after mechanical polishing, you can etch the sample by
using a different electrolyte and the external etching connection. Use an external etching kit
(option).
6 Operating the device
MoviPol-5
39
Summary of Contents for MoviPol-5
Page 5: ...11 Manufacturer 56 Declaration of Conformity 57 MoviPol 5 5...
Page 58: ......
