Color
Status
Green
The battery is fully charged. Charging has stopped.
Yellow
The battery is charted >80%.
The battery charger is in timer mode. The current is less than
maximum.
Charging will continue for a preset period of time: 4 hours.
Orange
Maximum charge current (2A).
5.5
Connecting the anode
1.
Place the connector of the anode wire in the socket marked
Anode
.
2.
Use the magnet to attach the anode wire to the sample.
If needed, use a clamping kit (option) as an accessory for non-magnetic samples.
3.
To remove the anode wire, press the button on the socket to release the plug.
5.6
Fitting the polishing chamber
1.
Fit the polishing chamber onto the tip of the polishing pistol. The
end with a groove fits against the polishing pistol.
A
Groove
5.7
Connecting an external etching kit (option)
You can connect an external etching kit (option) for etching with electrolytes without using the
polishing pistol and the electrolyte cartridge.
1.
Place the connector of the external etching anode wire in the socket marked
Anode
.
5.8
Noise
For information on the sound pressure level value, see this section:
5 Installation
MoviPol-5
25
Summary of Contents for MoviPol-5
Page 5: ...11 Manufacturer 56 Declaration of Conformity 57 MoviPol 5 5...
Page 58: ......
