Struers Discotom-50, Instruction Manual

Page: 11 / 156

Discotom-50
Instruction Manual
Front Panel Controls
Name Key Function Name Key Function
c
MAIN
SWITCH
The main power switch is
located on the right hand
side of Discotom-50. Turn
clockwise to switch on the
power.
i
FORWARDS
v Moves cutting table
forwards.
d
POWER
INDICATOR
Power
Lights when main power is
switched on.
j
BACKWARDS
V Moves cutting table
backwards.
e
START
s Starts the machine. The cut-
off wheel starts rotating and
the cooling water is turned
on.
k
FEED SPEED
Regulates the feed speed of
the cutting table. The speed
can be set from 0.1-2.5
mm/sec.
f
STOP
o
Stops the machine. The cut-
off wheel stops rotating and
the cooling water is turned
off.
l
FEED SPEED
REDUCED
Lights when the feed speed
has been set too high and is
reduced by the machine.
g
AUTO
Auto
Select or deselect automatic
cutting mode
1
ROTATIONAL
SPEED
Regulates the rotational
speed of the cut-off
wheel. The speed can be
set from 1000-3000 rpm.
h
AUTO
INDICATOR
Auto
Lights when automatic
cutting mode selected.
2
Reflects the present motor load status.
LOAD BAR
3
EMERGENCY
STOP
Push the red button to stop.
Pull the red button to release.
4
EMERG. STOP
OVERLOAD
o
Lights when emergency stop
has been pressed or the
cutting motor is overloaded.
7