6
INSTALLATION, CONT’D: SHIPPING BRACKET REMOVAL / CASE REMOVAL / ALIGNMENT
Skid
Hooks/Magnets For Lower
Front Panel Slots
Lower Front
Panel Slot
Lower Front
Panel
Lower Front
Panel Slot
Note: Illustrations Shown May Not
Exactly Reflect Every Feature or Option
of Your Particular Merchandiser.
4. Remove Shipping Brackets From Skid
Shipping brackets hold case to skid during shipment.
After case has been safely shipped to facility,
shipping brackets may be removed from skid.
5. Remove Lower Front Panel
Lower front panel may be lifted up and off unit (via
slot/hook and magnet method).
See illustration below.
6. Remove Case From Skid
Caution! Case must be supported at all times.
When case is at edge of skid, carefully lower to floor
so that two levelers rest on floor.
Carefully slide skid out from under case.
After case is off skid, place into position.
See next page for leveler adjustment specifics.
7. Alignment With Other Cases In Lineup
This unit may have to be carefully aligned with
others as part lineup.
Check lineup documentation (shipped with case) to
make certain that this unit is aligned properly.
Also, check whether lineup requires a filler panel.
