9. Inner Adjustable Close
-
Off / Outer End
Panel Base / Seal Close
-
Off To Floor
After case in position and levelers are properly
adjusted, insert the gravity-based inner adjustable
close-off into outer end panel base.
After sealant has been applied to underside of
adjustable close-off, adhere it to floor
10. Attach Inner End Panel To Case
After inner adjustable close-off has been sealed to
floor, attach inner end panel to case (via magnets).
See illustration below.
8. Adjust Levelers
Adjust levelers so the case is level and plumb.
Use adjustable wrench to adjust levelers.
Depending upon case weight it may be necessary to
use a pry bar to accomplish this task.
Do not use pry bar on toe-kick as it may buckle.
Do not use pry bar on end panel as it may chip.
Use pry bar ONLY on base frame to avoid
damaging case.
After levelers are adjusted, replace front panel.
7
7
INSTALLATION, CONT’D: ADJUST LEVELERS / INSERT AND SEAL INNER CLOSE-OFF TO FLOOR
Leveler
Adjustable
Wrench
Pry Bar
Inner Adjustable
Close-Off Shown
Removed From Case
(And Sealant Applied
To Its Underside)
Close-Off Shown Inserted
In Outer End Panel Base
and Lowered To Floor
Outer End Panel Base
Inner End Panel
Toe-Kick
Note: Illustrations Shown May Not
Exactly Reflect Every Feature or Option
of Your Particular Merchandiser.
9
8
9
10
8
