Strongway 61132, Owner'S Manual

Page: 6 / 14

Page 6 of 14

Use only on a hard, level surface.

Before moving, lower the load to the lowest possible point.

Apply load as close to the vertical portion of the lifting member as possible.

Before moving the load, assure that the load is centered and secured with a load restraint device.

No alterations should be made to this jack set.

Failure to heed these markings may result in personal injury and/or property damage.
Operating Instructions
⚠
WARNING

Do not exceed the rated load capacity.

Use only on a hard, level surface.

Do not start the vehicle’s engine, or drive with jacks in use. Jacks are designed for hand
maneuvering of vehicles only.

Do not use the jacks to lift tires wider than 12 inches.

Do not attempt to push the jacks over obstacles. They are designed to be used on level and
smooth surface only.

After lifting, be sure to always lock the pin in place before operating. Pull the pin our after finishing
work and then release the valve.
1. Place jack on floor and press the pedal down to release the pedal lock.