background image

Page 6 of 12 

 

CAUTION

 

AIR MOVER USE AND CARE 

 

Do not force the air mover. Products are safer and do a better job when used in the manner for 
which they are designed. Plan your work and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the air mover will operate properly 
and perform its intended function. Replace damaged or worn parts immediately. Never operate the 
air mover with a damaged part. 

 

Do not use an air mover with a malfunctioning switch. Any power tool that cannot be controlled 
with the power switch is dangerous and must be repaired by an authorized service representative 
before using. 

 

Disconnect the power/air supply from the air mover and place the switch in the 

‘locked’ or ‘off’ 

position before making any adjustments, changing accessories, or storing the air mover. Such 
preventive safety measures reduce the risk of starting the air mover accidentally. 

 

Store the air mover when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the air mover for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your air mover. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the air mover itself. 

Specific Operating Warnings 

WARNING

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK  

 

Electric shock hazard. DO NOT expose the unit to water. 

 

Risk of electric shock. Connect to a properly grounded outlet equipped with a ground fault circuit 
interruption device (GFCI). 

 

DO NOT use the unit with any Solid-State Speed Control Device. 

 

Risk of fire. DO NOT operate in areas with flammable fumes. Sparks from air mover may ignite 
fumes. 

 

DO NOT run the cord under carpeting. DO NOT cover the cord with throw rugs, runners, or 
similar coverings. 

 

DO NOT route the cord under furniture or appliances. Arrange the cord away from traffic areas 
where it will not be tripped over. 

 

DO NOT allow more than 4 blowers to be connected to each other at one time. 

 

DO NOT use an extension cord. 

 

Disconnect from the power supply before servicing. 

 

DO NOT block the air inlet or exhaust. 

 

DO NOT modify a grounded plug. 

 

DO NOT use if the cord or other parts are damaged. 

Summary of Contents for 52723













Reviews: