Page 9 of 12
NEVER directly clean the air mover with water. ALWAYS disconnect the air mover from its power
source before performing any maintenance or cleaning.
Maintain the air mover by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Air mover is not
running.
No power input.
Plug in the air mover; check circuit breaker.
Switch is not turned
to ‘on’ position.
Turn switch
to ‘on’ position.
Air mover fan wheel jammed.
Remove material jamming fan wheel.
Intake or exhaust blocked.
Turn unit off and allow to cool, remove
blockage.
Air mover is
vibrating.
Accumulation of dirt on fan blades.
Clean the air mover fan blades.
Parts Diagram
