background image

23 

 

Limited Warranty 

 

Limited Warranty   

Northern  Tool  and  Equipment  Company,  Inc.  ("We''  or  '"Us'')  warrants  to  the  original  purchaser  only 

("You''  or  “Your”)  that  the  Strongway  product  purchased  will  be  free  from  material  defects  in  both 
materials  and  workmanship,  normal  wear  and  tear  excepted,  for  a  period  of  one  year  from  date  of 
purchase.   The  foregoing  warranty  is  valid  only  if  the  installation  and  use  of  the  product  is  strictly  in 
accordance with product instructions. There are no other warranties, express or implied, including the 
warranty of merchantability or fitness for a particular purpose. If the product does not comply with this 
limited  warranty,  Your  sole  and  exclusive  remedy  is  that  We  will,  at  our  sole  option  and  within  a 
commercially reasonable time, either replace the product without charge to You or refund the purchase 
price (less shipping). This limited warranty is not transferable. 
 

Limitations on the Warranty 

This  limited  warranty  does  not  cover:  (a)  normal  wear  and  tear;  (b)  damage  through  abuse,  neglect, 
misuse,  or  as  a  result  of  any  accident  or  in  any  other  manner;  (c)  damage  from  misapplication, 
overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration in 
any manner by anyone other than Us, with the sole exception of alterations made pursuant to product 
instructions and in a workmanlike manner. 
 

Obligations of Purchaser   

You must retain Your product purchase receipt to verify date of purchase and that You are the original 
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make and 
model  number,  and  follow  the  claim  instructions  that  will  be  provided.  The  product  and  the  purchase 
receipt  must  be  provided  to  Us  in  order  to  process  Your  warranty  claim.  Any  returned  product  that  is 
replaced or refunded by Us becomes our property. You will be responsible for return shipping costs or 
costs related to Your return visit to a retail store. 
 

Remedy Limits 

Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or 
any other warranty related to the product. We shall not be liable for: service or labor charges or damage 
to Your trailer incurred in removing or replacing the product; any damages, including, without limitation, 
damages to tangible personal property or personal injury, related to Your improper use, installation, or 
maintenance  of  the  product;  or  any  indirect,  incidental  or  consequential  damages  of  any  kind  for  any 
reason. 
 

Assumption of Risk 

You acknowledge and agree that any use of the product for any purpose other than the specified use(s) 
stated in the product instructions is at Your own risk. 
 

Governing Law 

This limited warranty gives You specific legal rights, and You also may have other rights, which vary from 
state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or 
consequential  damages,  so  the  above  limitations  may  not  apply  to  You.  This  limited  warranty  is 
governed by the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The 
state  courts  located  in  Dakota  County,  Minnesota  shall  have  exclusive  jurisdiction  for  any  disputes 
relating to this warranty. 

 

 

Distributed by 

Northern Tool + Equipment Co., Inc. 

Burnsville, Minnesota 55306 

NorthernTool.com   

Made in China

 

Summary of Contents for 46270
























Reviews: