background image

surewerx.com

2

!

 WARNING!

The use of portable automotive lifting devices is subject to certain hazards that cannot be  
prevented by mechanical means, but only by exercise of intelligence, care, and common sense. 
It is therefore essential to have personnel involved in the use and operation of equipment who are 
careful, competent, trained, and qualified in the safe operation of this equipment and its proper use 
when servicing motor vehicles and their components. Examples of hazards are dropping, tipping, 
or slipping of motor vehicles or their components caused primarily by improperly securing loads, 
overloading, off-centered loads, use on other than hard level surfaces, and using equipment for a 
purpose for which it was not designed. 

The owner and / or operator shall study and understand the product and safety instructions  
before operating this equipment. Safety information shall be emphasized and understood.  
If the operator is not fluent in English, the product and safety instructions shall be read to and 
discussed with the operator in the operator’s native language by the purchaser / owner or his 
designee, making sure that the operator comprehends their contents. A copy of these instructions / 
warnings shall be retained for future reference. 

!

 INSPECTION

Visual inspection shall be made before each use of this equipment, checking for abnormal  
conditions, such as cracked welds, leaks, damaged, loose or missing parts. This equipment shall 
be removed immediately from service if it is believed to have been subjected to an abnormal 
or shock load, the equipment shall be inspected by a qualified repair facility. Owners and / or 
operators should be aware that repair of this equipment may require specialized knowledge and 
facilities. It is recommended that this equipment be inspected annually by a qualified repair facility. 
Defective parts, decals, safety labels or signs should be replaced with Strongarm specified parts. 

!

 WARNING!

•  Prior to lifting a vehicle, refer to vehicle manufacturer’s recommended lifting points. 
•  Inspect the jack prior to each use, remove from service if it is leaking, damaged,  

excessively worn, or has been altered in any way. 

•  This jack was designed for lifting purposes only. Do not attempt to work on the  

vehicle until appropriately rated jacks stands are supporting the load. 

•  Do not exceed rated capacity. 
•  Do not move or dolly the vehicle while on jack. 
•  Chock vehicle to prevent movement. 
•  Center load on saddle, off center loads may cause jack failure and / or loss of load. 
•  Use jack on a hard level surface. 
•  Only attachments and / or adapters supplied by the manufacturer shall be used. 
•  No alterations shall be made to this product. 
•  Failure to heed these markings may result in severe or fatal personal injury and /  

or property damage. 

Summary of Contents for SureWerx 728D







Reviews: