MAINTENANCE
Daily
.
Inspect for distortion of components, and security of all nuts and bolts. If in doubt, do not use.
Have damaged parts repaired or replaced. If necessary, consult your CLARKE dealer.
Every 6 months
Remove the top cover by unscrewing the cover securing screws (the covers on the 5 and
10 Tonne models, hinge back towards the handle), and inspect thoroughly for cracks or
distortion of the components, and security of all nuts and bolts. If in doubt, do not use. Have
damaged parts repaired or replaced.
Lubricate all parts and check for oil leaks. If a slight oil seepage is evident, check the ram oil
level, by removing the filler plug, directly on top of the ram. The oil should be level with the
bottom of the filler orifice. If necessary, top up with CLARKE HYDRAULIC OIL. (See your
CLARKE dealer. For 1 litre bottle quote Part No. 3050830.)
If the leak is more pronounced, DO NOT use the jack....consult your CLARKE dealer.
Grease the points shown in Fig.1..Castor Assembly’s, Front Wheels (except for the 3 Tonne
model which is not provided with grease points at the front wheels), and pivot point.
Storage
Store in a dry place where it cannot be attacked by the elements. If stored for long periods,
inspect at least twice a year, clean and re-oil. For servicing, contact your CLARKE dealer, or
CLARKE International Service Dep’t.
SPECIFICATIONS
Model No.
CTJ3GLC
CTJ5GLC
CTJ10GLC
(3tonne)
(5tonne)
(10tonne)
Maximum load (Tonnes)
3
5
10
Minimum Height (mm)
130
150
170
Maximum Height (mm)
610
570
585
Overall Length (mm)
1415
1405
1545
Overall Width
340
375
460
Weight (kg/lbs)
80/176
102.5/225
148/325
Part No.
7621030
7621035
7621040
SPARE PARTS
The following user serviceable parts are available from your Clarke dealer, or Clarke
International Parts Dept.
1.
Saddle
2.
Castor Assembly
3.
Front Wheel Assembly
4.
Release Valve Operating Lever
For Spare Parts and Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
GUARANTEE.
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt which will be required as proof of
purchase.
This guarantee is invalid if the product is found to have been abused in any way, or not used
for the purpose for which it was intended. Faulty goods should be returned to their place of
purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
3, 5 & 10 tonne
LONG REACH TROLLEY JACK
1299
Model Nos. CTJ3GLC, CTJ5GLC & CTJ10GLC