PART 1 • English
15
English
5.4 Timer
You can set the timer to make the receiver perform designated actions including timer based wake up or
sleep instructions to the receiver.
n
Timer Index
Use the
tu
buttons to select.
n
Active
Use
tu
buttons to select among
Power on
,
Power off
,
Duration, Recording and OFF (disable timer)
n
Mode
You can set the cycle of the action designated in the timer mode (
Once
,
Daily
or
Weekly
)
n
Channel Type
Press
OK
button to display current channel list and using navigation buttons select channel to
be shown when the receiver will power on by timer event. You can use TV/R button to select
between TV and Radio channels.
n
Starting Time
You can set the starting date or days of the week for the timer action. Use Numeric buttons to
enter the starting time of the timer action.
n
Duration
Use Numeric buttons to enter the duration of channel view when the
Timer mode
is set to
Time Interval
.
5.5 Application
This menu will help you to use
USB, Calendar, Tetris (Game)
.
5.5.1 USB
The Receiver is equipped with host controller. Insert your USB memory device to USB connector. Make
sure, that power consumption of your USB device is not higher than 500 mA. In case your USB memory
device power consumption is higher – make sure to connect an external power supply to your memory
device before connecting it to your receiver. Usage of memory device with high power consumption may
damage your receiver.
Select
USB menu
in application with
pq
and press
OK
If you would like to backup channels or software to USB memory:
1. Press
GREEN
button and select type of data to store (“
Channel data (UDB)
” will store only
channels while “
All SW dates (UAD)
” will store software and channels).
2. Select one item and press
OK
to proceed.
3. Name of created file will be “STB_ALL_MMDDhhmm.UAD” or “STB_DB_MMDDhhmm.
UDB”, where: MM – month when file is created; DD – date; hh – hours; mm - minutes
To restore backed up data:
1. Select file (UAD or UDB) and press
OK
.
2. List of possible actions will be displayed. Make your choice and press
OK
to proceed.
3. After updating data from selected file your receiver will reboot automatically in 3 seconds.
