PART 1 • English
12
Edit
Press
RED
button to edit name of the channel. On screen will appear keyboard. To delete current name
select
Backspace
(
GREEN
Button) and press
OK
. To enter new name use navigation and
OK
buttons. To
save new name press
YELLOW
(
Save
) or
BLUE
(
Save & Exit
) button. Channel name will be changed in all
channel lists. To cancel your modifications press
EXIT
..
Lock
Lock function can be used in order to block access to some channels. Press
GREEN
button to lock/
unlock channel of your choice. Locked channel will be marked by Lock symbol. In order to watch locked
channel you will need to enter PIN code. Channel will be locked in all channel lists.
Delete
Pressing
YELLOW
button will mark selected channel to delete. To unmark channel select it and press
YELLOW
button again. Channel(s) will be deleted after you press
BLUE
button. Be aware: after pressing
BLUE
button
channel(s) will be deleted from all channel lists. To cancel delete operation you can press
EXIT
button.
Message “
Do you want to save?
” will appear on screen. Press
EXIT
to cancel or
OK
to confirm.
5.2 Terrestrial Search
The
Terrestrial Search
menu contains following sub-menus: ”
Channel Setup
” and “
Terrestrial Settings
”
In first order make sure that Terrestrial settings are correct and corresponds to the country where you leave.
5.2.1 Channel set-up
There are 2 possible ways of terrestrial channel search:
Auto Scan
(
RED
button) and
Manual Scan
(
GREEN
button).
n
Manual Search
Select one or several frequencies by
OK
button then
Manual Scan
(
GREEN
button) to search for
channels on selected frequencies.
n
AutoScan
Press
Auto Scan
(
RED
) to scan all frequencies in the list.
On completing the search, the receiver will save automatically the services information.
5.2.2 Terrestrial settings
Use
pqtu
buttons to select your
Country
,
Antenna Supply
and
Channel Numbering
.
n
Country
:
With
OK
you can open the list to select your home country.
n
Antenna Supply
:
Select this option to
ON
in case you use active antenna powered
through coaxial cable. The receiver supply DC power +5 V into 50 mA
load maximum.
n
Channel Numbering
:
select this option to “
Operator defined
” in case your operator provide
logical channel numbering feature. Otherwise select “
Appearing order
”.
