PART 1 • English
5
English
2.2 Rear panel
1.
ANT IN
To connect a terrestrial antenna for receiving broadcasting signal.
2.
TO TV
To connect a TV set to receive analogue channels or to connect an extra receiver.
3.
USB
To connect an external USB memory device.
4.
TV SCART
To connect your receiver with your TV set using a SCART cable.
5.
S/PDIF
To connect your receiver to digital audio amplifier..
6.
VIDEO
This connector has a constant video signal for connection to TV set without SCART
connector or to VCR.
7.
AUDIO
These connectors give you the possibility to connect the audio signal to an external amplifier
or to the audio input of your TV.
8.
Main power switch
Power OFF and ON your receiver.
9.
Power cord
Your receiver requires a voltage of 100 – 240 V AC (Auto-selectable), 50 ~ 60 Hz +/-5 %.
Make sure to check the power specification before connecting your receiver to the wall outlet.
Warning
: Make sure all connections are made in correct order before connecting your receiver to
the mains power. Always at first power on your receiver, then TV set.
