PART 1 • English
15
English
5.4 Setup
In this menu you can setup Timer for switching receiver ON/OFF according to schedule, block access to
the receiver settings and channels, get information about software and hardware version of your receiver,
update software and return receiver to factory settings.
5.4.1 Timer
Setting up Timer make possible to switch receiver to channels automatically, according to schedule.
Number
:
To select timer number use buttons
tu
Status
:
By default set to
Disabled
. Set to Enabled in order to get access to other options
of timer.
Action
:
You can select one of the following actions:
n
“
Power On
”:
receiver will be turned ON at defined date and time on selected channel.
n
“
Interval
”:
receiver will be turned ON at defined date and time on selected channel. At the
end of interval the receiver will be turned to stand-by mode.
n
“
Power Off
”:
receiver will be turned OFF at defined date and time.
Cycle
:
You can setup repeating cycle of the timer action. The receiver will execute
action once, daily or weekly.
Date
or
Week day
:
Press
OK
button to display calendar or list of week days. In calendar use
pqtu
buttons to select date,
P+/P-
to change month. Press
OK
to confirm
selection. If timer cycle set to
Everyday
the date selection is not active. If timer
cycle set to
Weekly
– you can select week day.
Time
:
use buttons
0..9
to enter time in Hours:Minutes format.
Duration
:
use buttons
0..9
to enter interval between Power ON and OFF. This option not
available if
Action of timer
set to
Power On
or
Power Off
.
Channel
:
press button
OK
to display channel list. In the channel list use navigation
buttons to select channel and
OK
to confirm selection. You can use button
TV/R
to switch between TV and Radio channels.
To store settings of Timer press
GREEN
(
Save
) button. To discard changes press
EXIT
.
5.4.2 Parental control
In this menu you can setup restriction of access to menu and
Enable/Disable
lock of the channels that are
marked as locked in the channel organizer.
Menu Lock
:
Disabled
by default. If you wish to lock access to Menu then set this option
to
Enabled
.
Service Lock
:
Enabled
by default. Viewing of the channels marked as locked possible only
after entering PIN code. If you wish to disable lock of access to locked channels
then set this option to
Disabled
.
Change Password
:
In this menu you can change your password (PIN code). Select this option and
press
OK
.
On the factory PIN code is set to «
0000
». If you forgot your PIN code – call to service support.
