PART 1 • English
12
Remove channel from favourite group.
Use button
FAV
to select favourite group where you wish to remove channel. Use button
u
to move
menu focus to the right part of screen (favourite group content). Use buttons
pq
to select channel that
you would like to remove and press
OK
to confirm.
To store changes press
GREEN
(
Save
) button.
5.2 Installation
Menu «
Installation
» consist of following submenus: «
Auto Scan
», «
Manual Scan
», «
Advanced Scan
» and
«
Terrestrial setting
».
In first order make sure that all Terrestrial Settings are corresponds to broadcast parameters in your area.
5.2.1 Auto Scan
Select this item and press
OK
to start automatic scan of all channels broadcasted in your area. During
search process on screen will be displayed following information: scanned frequency, number of scanned
frequencies/total number of frequencies, number of found channels and their names.
At the end of scan process you will have possibility to select one of the options:
n
Store found channels and switch to live view mode by pressing
OK
button;
n
Store found channels and return to menu by pressing
MENU
button;
n
Discard channel search result and return to menu by pressing
EXIT
button.
In case of no channels found the receiver will display corresponded message. In such a case make sure
that antenna is connected to the ANT IN connector. Repeat auto scan after all connections are checked.
5.2.2 Manual Scan
This function can be used in case of broadcast is present on not standard frequency.
Select this item and press
OK
.
Manual Scan
menu will be displayed on screen.
Frequency
:
using buttons
0..9
enter frequency in KHz, for example 474000.
Bandwidth
:
using buttons
tu
select channel bandwidth.
Make sure that signal level and quality are acceptable (more than 50 %) and press
GREEN
(
Start Scan
) button.
At the end of scan process you can select one of the options described in part 5.2.1.
