background image

2

STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 

73/23/EC, RoHS 2002/95/EC

Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of 
products may change. Manufactured under license from Dolby Laboratories. Dolby Audio, Dolby Digital, Dolby Digital Plus and the 
double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC in the United States and other countries. 

The HD+ card is subject of use within the Federal 

Republic of Germany.

 All product names are trademarks or registered trademarks of their respective owners.

© STRONG 2016. All rights reserved. 

TAbLE OF CONTENT

1.0 INTRODUCTION 

3

1.1 Safety Instructions 

3

1.2 Storage 

3

1.3 Equipment Set-up 

3

1.4 Accessories 

4

1.5 Usage of external USB devices 

4

2.0 YOUR RECEIvER 

4

2.1 DEFAULT PIN-CODE: 0000 

4

2.2 Front Panel 

4

2.3 Side Panel 

4

2.4 Rear Panel 

4

2.5 Remote Control 

5

2.6 Installing the batteries 

6

2.7 Using the remote control 

6

3.0 CONNECTIONS 

6

3.1 Connecting the Antenna and LNB (Low Noise Block) to the receiver 

6

3.2 Connecting to digital audio amplifier 

6

3.3 Basic connection using an HDMI cable 

6

3.4 Basic connection using a SCART cable 

7

3.5 Connecting to the Internet 

7

3.6 Connection to main power supply 

7

4.0 STARTING UP FOR THE FIRST TIME 

7

4.1 Language selection 

7

4.2 Antenna Settings 

7

4.3 Channel Search 

8

5.0 QUICk GUIDE FOR USING YOUR RECEIvER 

8

6.0 OPERATION 

9

6.1 Selecting channels 

9

6.2 Volume Control 

10

6.3 Programme Information (Info banner) 

10

6.4 Selecting audio language 

10

6.5 Selecting subtitle language 

11

6.6 Viewing the teletext 

11

6.7 Quick changing of Screen settings 

11

6.8 Electronic Programme Guide (EPG) 

11

6.9 Favourite channels 

12

7.0 MAIN MENU 

12

7.1 Channel 

12

7.2 Settings 

13

7.3 Multimedia 

17

7.4 Network 

18

7.5 Installation 

19

8.0 TROUbLESHOOTING 

21

9.0 SPECIFICATIONS 

22

10.0 TERMS & CONDITIONS HD+ (IN GERMAN) 

24

Summary of Contents for SRT 7806

































Reviews: