7
PART 1 • English
English
6.0 oPERATIon
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.
6.1 Changing channels
Your new receiver is equipped with different ways to change channels.
via direct access
via the channel list
via the
pq
keys.
via the RECAll key.
6.1.1 Direct access
To gain direct access to a certain channel, simply input its number with the 0~9 key’s on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press ok in viewing mode to display the channel list. Use
pq
to highlight your channel of choice and
press ok once to select the highlighted channel. The channel list is equipped with a
Find
function to
make finding the desired channels easier. While in the channel list, press RED. An alphabet banner will
now be displayed. Use
pq
to select the first letter (or letters) of the desired channel and ok to confirm.
All channels beginning with the chosen letter(s) will now be displayed. Close the alphabet banner with
EXIT and select the desired channel in the filtered list.
The following keys are available in the channel list and viewing mode:
RED: Opens an alphabet banner for fast finding the desired channel
Tv/RADIo: Toggles between TV and radio channels
goTo: opens the
Satellite
List
for satellite selection
In viewing mode:
fAvoURITE: to switch to one of the available favourite lists.
6.1.3 Using the
pq
keys
p
will switch to a higher channel.
q
will switch a lower channel.
6.1.4 Using the RECAll key
Use RECAll button for switching between last viewed channels. Please refer to section 7.6 for
more details.
6.2 Info banner
At any time during viewing mode you can press the Info button to get info about the current channel
and now and next program*. Press Info twice to see the detailed info of now and next program and the
technical details about the current channel. Press Info again or EXIT to close the information.
You can change the duration of info banner displaying in the Option menu. Please refer to section 7.5 for
more details.
* Program information is displayed when available. Availability depends from broadcast.
6.3 Selection of audio language
Some channels support a choice of different audio formats and/or languages. To select another audio
stream, press AUDIo in viewing mode. A list with available audio streams will now be displayed. Use
pq
to select the desired stream and confirm with ok. With the
tu
buttons you could select using of
Left, Right or
tu
speakers.
Summary of Contents for SRT 7000
Page 1: ...User Manual Digital High Definition Satellite Receiver SRT 7000 Picture similar ...
Page 2: ......
Page 3: ......