background image

13

PART 1 • English

English

After configuring press ok or blUE again to start scanning with the selected settings.
Your receiver will now perform an automatic channel search with scan progress shown on screen. During 
channel search you can skip Transponders by pressing MEnU button, or quit the scan process by EXIT
Once the process is finished, all found channels will be stored and the receiver will switch to the first 
found channel.

Multi-Satellites Scan:

 

 When using a multi feed antenna with more than 1 LNB, select the satellites 
your antenna is adjusted for by ok button. The selected satellites will be 
marked by the symbol “

z

“. Set in the DiSEqC point the appropriate LNB 

numbers and press blUE for 

Scan

. A window with scanning settings will be 

displayed. After configuring the settings like explained in Single Satellite Scan 
above, press ok or blUE again to start Multi-Scan on all selected satellites.

Scanning by transponder (Manual Scan)
Press goTo for displaying the transponder list of the focused satellite. By pressing goTo again you 
switch back to the satellites list.

Single Transponder Scan:    

Use 

pq

 buttons to highlight the transponder your wish to scan. Press blUE 

for 

Scan

. A window with scanning settings will be displayed. After configuring 

the settings (explained in 7.3.1.3 above), press ok or blUE again to start 
scanning on focused transponder. Once the scan process is finished, all found 
channels will be stored and the receiver will switch to the first found channel.

Multi-Transponder Scan

:   Select the transponders you want to scan by ok button. The selected 

transponders will be marked by the symbol “

z

“. Press blUE for 

Scan

. A 

window with scanning settings will be displayed. After configuring the settings 
like explained in 7.3.1.2 above, press ok or blUE again to start Multi-Scan on 
all selected transponders.

7.3.1.4 Satellite Edit options

Add satellites:  

 

Press RED to add a new satellite. In new opened menu enter the satellite’s 
name and position by using Navigation and Numeric buttons. In the appeared 
key table select a character by using the navigation buttons. Press ok to 
choose the character. Once you finish inputting the new name, navigate to 

OK

” button on screen and press ok on the remote control to confirm the 

new name. 
Save the settings with ok or cancel by EXIT.

Edit satellites:  

 

Press gREEn to edit the focused satellite. For changing settings see 
explanation above. Confirm changes with ok or cancel by EXIT.

Delete satellite:  

 

Press YElloW to delete the focused satellite. Press ok to confirm deleting or 
EXIT to cancel it.

7.3.1.5 Transponder Edit options

Add transponder:  

 

Press RED to add a new transponder. In new opened menu enter the 
transponder´s data by using Navigation and Numeric buttons. Confirm the 
settings with ok or cancel by EXIT. An existing TP cannot be stored again 
under the same satellite.

Edit transponder:  

 

Press gREEn to edit the focused transponder. In new opened menu enter the 
new transponder´s data by using Navigation and Numeric buttons. Confirm 
changes with ok or cancel by EXIT.

Delete transponder:  

 

Press YElloW to delete the focused transponder. Press ok to confirm deleting 
or EXIT to cancel it.

Summary of Contents for SRT 7000


























Reviews: