Strong SRT 7000, User Manual

Page: 11 / 25

8
PART 1 • English
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TTX button in viewing mode
and use the 0~9 or
pq buttons to select the number of the page you wish to see. Subpages (once
loaded and if available) can be selected with the
tu
buttons. The coloured buttons of the remote
control allow you to jump to selected pages directly, as indicated on the bottom of the teletext screen.
Press TTX again or EXIT to go back to viewing mode.
6.5 Subtitles
Some programs support a choice of different DVB subtitle languages. Press the SUbTITlE button in
viewing mode to display a list of available subtitle languages. Use
pq to select the desired subtitle and
confirm with ok.
6.6 Changing the Aspect Ratio format
To change the Aspect Ratio format while watching TV, simply press the YElloW button in viewing mode.
Each pressing will switch to the next format. Please refer to section 7.2 for more details.
6.7 Changing the Resolution format
To change the Resolution format while watching TV, simply press the gREEn button in viewing mode.
Each pressing will switch to the next format. Please refer to section 7.2 for more details.
6.8 EPg (Electronic Program guide)
The Electronic Programme Guide is a very useful function that allows you to watch programme schedules
and information on screen and to mark programs for recording. Press the EPg button to activate this
guide (You can enter EPG via Menu too). Use
pqtu
to select the desired channel and RED to move
the highlight to the program list. In the program list, use
pq
to select or scroll through programs and
tu to display program information for the next/previous days. Use blUE to display detailed information
about the selected program. If there is more than one page of information, use
tu
to scroll.
noTE:
Availability of EPG data depends on broadcast.
booking a program from EPg
Select a program as described above. Once the desired program is selected, press ok. This will lead you
to the Timer (
Schedule ) menu. All details are already filled in for you. Make a choice between View and
Record mode and save the timer with ok. To display the list of booked events just press the blUE button
being in the channel list part of EPG or in viewing mode. Please refer to section 7.4.1 for more details.
6.9 favourite channels
Use the fAvoURITE button to access your favourite channels and to toggle between available favourite
groups. Please refer to section 7.1.1 for details how to create favourite lists.
6.10 Changing between DTv/vCR contents
Switching between DTV/VCR contents in operation mode is realized by using the DTv/vCR button. “AV
IN” will be displayed on the front LED when receiver is in VCR mode. Press DTv/vCR button again to
return to the digital TV content. Please refer to
Loop Through point in section 7.2 for more details.
6.11 Instant Recording
To perform a recording you have to insert USB storage device into USB port of the receiver. Select a
channel you would like to record and press REC button. The recording will start and at the left upper
corner of the screen you will see recording notification with blinking RED dot and record duration.
During recording you can change to channels from same transponder only. Only these available channels
will be displayed in the channel list. Once switching to a channel different as the recorded one, the
number of the recorded channel will be displayed in the recording banner at the left upper corner of the
screen. In the channel list the recorded channel will be marked by a record symbol.
You can check details of the recording in progress by pressing the Info button.